i.MX 8QuadMax/QuadPlus SMARC SOM

iW-RainboW-G27M^®

i.MX 8 QM/QP SoC with Arm Cortex-A72 & Arm Cortex-A53
Dual Complex Core System:
- Complex 1: 4 x Cortex-A53 @ 1.2 GHZ
- Complex 2: 2 x Cortex-A72 @ 1.6 GHZ
2 x Cortex-M4F @ 264 MHZ for advanced system control
ARM v8 64-bit instruction capability; Fully 32-bit capable
Integrated Full Chip Hardware Virtualization capabilities
16-Shader 3D (Vec4)
4K H.265 decode & 1080p H.264 encode/decode capable VPU
Enhanced Vision Capabilities (via GP)
IEEE 802.11 a/b/g/n/ac/ax* Wi-Fi & BT 5.0 Module
Dual 1000/100/10 Mbps Ethernet
LPDDR4 – Up to 8GB
SMARC v2.1.1 compatible
Security Suite (Optional)

Categories: System On Modules, SMARC Modules

On Module Features:

CPU	i.MX 8 Quad Max: 2 x Cortex-A72, 4 x Cortex-A53, 1 x Cortex-M4 & 1 x Cortex-M4F i.MX 8 Quad Plus: 1 x Cortex-A72, 4 x Cortex-A53, 1 x Cortex-M4 & 1 x Cortex-M4F
Memory & Storage	LPDDR4 expandable up to 8GB 16GB eMMC Flash expandable up to 256GB Micro SD slot (Optional) QSPI Flash (Optional)
Communication	Gigabit Ethernet PHY Transceiver x 2 USB 3.0 High Speed 4-Port Hub IEEE 802.11 a/b/g/n/ac/ax* Wi-Fi 5 & BT 5.2 under On Module Feature

Edge Connector Features:

Gigabit Ethernet x 2 Ports
USB 3.0 Host x 2 Ports
PCIe x 2 Ports
SATA x 1 Port
USB 2.0 OTG x 1 Port
USB 2.0 Host x 2 Ports
SD (4bit) x 1 Port
LVDS1/MIPI_DSI x 2 Channels
HDMI/DP Transmitter x 1 Port
SAI/I2S (Audio Interface) x 2 Ports
Debug UART
Data UART (with CTS & RTS) x 1 Port
Data UART (without CTS & RTS) x 1 Port
CAN x 2 Ports
SPI x 2 Ports
I2C x 1 Port
GPIO, Control & Status Signals
MIPI CSI x 2 Channel (1 x 2Lane, 1 x 4Lane)

Expansion Connector Features (Optional):

LVDS0 x 2 Channels
MLB x 1 Channel
HDMI Receiver X 1 Port (Optional)
CAN x 1 port
I2C/ SPDIF x 1 port
ESAI x 1 port
GPIOs
2 lane of MIPI CSI0 x1 (No clock Lane)
TAMPER x2

OS Support:

Linux 6.1.22
Android Pie 11.0.0

QNX 7.1.0 (or higher)
Ubuntu 22.04

General Features:

Power Input	5V, 2.5A through SMARC Edge Connector
Form Factor	82mm x 50mm, SMARC v2.1.1 compatible
Operating Temperature	-40°C to +85°C
Environment Specification	REACH & RoHS3 Compliant

Note: Optional features are not supported in default configuration.

DEVELOPMENT KIT

Gigabit Ethernet Jack x2
PCIe X1 & M.2 KEY B PCIe
M.2 KEY B SATA
USB 3.0 Type-A & Type-C
USB 2.0 Host Type-A x2
USB 2.0 OTG Type-micro AB x1
Standard SD x1
HDMI2.0/DP1.3 x1
MIPI DSI Connector
20pin LVDS Connector
OV5640 MIPI CSI Camera Connector
Audio In/Out Jack through I2S Codec x2
MIPI CSI Camera Connector
Full Function UART – 1 Port
RTC with backup battery
CAN Header x2
Debug UART through Micro USB Port

THERMAL SOLUTIONS

For any highly Integrated System on Module, thermal design is a very important factor. iWave supports Heat Sink & Heat Spreader solution for i.MX 8 QM/QP SMARC SoM

OV5640 MIPI CAMERA DAUGHTER BOARD

Two OV5640 Camera Connector

ENCLOSURE

The Enclosure is essential for a Devkit, iWave provides rugged Aluminium and metal sheet enclosure options which keeps the device safe whilst maintaining full access to all the major ports.

AMD

INTEL

ACHRONIX

NXP

TI

ST

RENESAS

PCIe CARDS

VPX CARDS

FMC CARDS

PCIe Cards

VPX Cards/SBC

FMC Cards

Documents

Design Support

Application Notes

Software

Documents

Design Support

Application Notes

Software

i.MX 8QuadMax/QuadPlus SMARC SOM

i.MX 8QuadMax/QuadPlus SMARC SOM

On Module Features:

Edge Connector Features:

Expansion Connector Features (Optional):

OS Support:

General Features:

DEVELOPMENT KIT

THERMAL SOLUTIONS

OV5640 MIPI CAMERA DAUGHTER BOARD

ENCLOSURE

Related products

i.MX 8M Mini or i.MX 8M Nano SODIMM SOM

i.MX 8M Mini or i.MX 8M Nano uQseven SOM

i.MX 8M Plus OSM-LF LGA Module

i.MX 8M Quad/QuadLite/Dual SMARC SOM

i.MX 8QM/QP Pico ITX SBC

i.MX 8QuadMax/QuadPlus Qseven SOM

RELATED VIDEOS

Related products

i.MX 8M Quad/QuadLite/Dual SMARC SOM

i.MX 8QuadMax/QuadPlus Qseven SOM

i.MX 8M Mini or i.MX 8M Nano uQseven SOM

i.MX 8QM/QP Pico ITX SBC

i.MX 8M Mini or i.MX 8M Nano SODIMM SOM

i.MX 8M Plus OSM-LF LGA Module

Related News

The Need for Thermal Management in Embedded Boards and Solutions

8 Reasons Why You Should Choose a System on Module in Your Next Product Design

QNX RTOS on iWave’s i.MX8QM/QP SMARC Module

The Cortex® M4F: Enabling next-generation real-time processing in i.MX8QM SMARC System on Module

XEN virtualization on iWave’s i.MX8QM System on Module

Linux 5.4 kernel availability for i.MX8QM SMARC and SBC

Ubuntu 18.04 LTS support for iWave’s i.MX8QM SMARC SOM and SBC Products

Unleash a world of smart possibilities with iWave and Crank

iWave chooses u‑blox JODY-W2 Bluetooth® and Wi-Fi module for its i.MX8 SoM and SBC designs

Subscribe to iWave Newsletter