ADC & DAC PCIe Card Powered by RFSoC

ADC & DAC PCIe Card Powered by RFSoC

iW-RainboW-G42P®

  • AMD Xilinx’s ZU49/39/29DR Zynq Ultrascale+ RFSoC
  • RAM Bandwidth
    • 8GB, 64bit DDR4-2400 RAM with ECC for PS
    • 8GB, 64bit DDR4-2666 RAM for PL (Expandable)
  • 16 DAC channels through SMA connector upto 10Gsps
  • 16 ADC channels through SMA connector upto 2.5Gsps
  • 3/4 Length PCIe Gen3 x8 Host Interface
  • Integrated ultra low-noise programmable RF PLL
  • Integrated SyncE & PTP Network Synchronization
  • NVMe PCIe Gen2 x2/x4 M.2 Connector
  • FMC+ HSPC Connector
Categories: ,

Zynq Ultrascale+ RFSoC ZU49DR/ZU39DR/ZU29DR
  • Processing System (PS/Processor)
    • Quad/Dual Arm Cortex-A53 @1.3GHz,
    • Dual Cortex-R5F @533MHz
  • 16x DAC Ports support max date upto 10Gsps
  • 16x ADC Ports support max date upto 2.5Gsps
  • PL GTY High Speed Transceivers x16 @28.21Gbps
RAM Memory
  • 8GB, 64bit DDR4 RAM with ECC for PS
  • 8GB, 64bit DDR4 RAM for PL (expandable up to 16GB)
Flash Memory
  • 256MB QSPI Flash for Booting
  • 32GB eMMC Flash for Storage
  • Micro SD slot from PS
  • M.2 NVMe Slot from PS with PCIe Gen2 x2/x4 interface
ADC Channels (x16)
  • 4 x Right Angle SMA connectors on Front Panel with Balun(BW-800MHz-1GHz)
  • 4 x Straight SMA connectors with Balun(BW-800MHz-1GHz)
  • 4 x Straight SMA connectors with Balun(BW-700MHz-1.6GHz)
  • 4 x Straight SMA connectors with Balun(BW-10MHz-3GHz)
DAC Channels (x16)
  • 4 x Right Angle SMA connectors on Front Panel with Balun(BW-800MHz-1GHz)
  • 4 x Straight SMA connectors with Balun(BW-800MHz-1GHz)
  • 4 x Straight SMA connectors with Balun(BW-700MHz-1.6GHz)
  • 4 x Straight SMA connectors with Balun(BW-10MHz-3GHz)
Clock & PLL
  • Integrated Configurable ultra low noise PLL for ADC & DAC
  • Fully Configurable Clock Synthesizer with SyncE and PTP support
  • 4 x SMA Straight connector for clocks(10Mhz IN, 1PPS IN, Synchronous Clock In & Out)
Host Interface
  • PCIe Gen3 x8 Edge Connector
Expansion
  • FMC+ High serial Pin connector (HSPC) Connector
    • 8 channel GTY Transceivers @ upto 28.21Gbps
    • 2 GTY Reference Clock
    • 48 LVDS IOs/96 Single ended (SE) IOs from PL Banks
Others
  • RJ45 1GbE Ethernet Port on Back Panel from PS
  • Display port through USB-Type-C connector from PS
  • RTC Battery Holder
Debug
  • Integrated JTAG Programming/Emulator Module
  • USB TypeC Debug Port on Front Panel for PS Debug UART, DATA UART and JTAG
Thermal
  • Fan sink (by default)
Operating Temperature
  • -40°C to +85°C (Industrial)
Power
  • 75W max from PCIe x 8 Host
  • 8Pin ATX Power Connector in Back Panel Power Droop Sharing (to maximise power when needed)
  • Power dissipation is application dependent
Form Factor
  • 254mm x 111.15mm (¾ Length PCIe)
Compliance
  • RoHS Compliant
  • REACH Compliant
  • CE*
* Under Progress

Custom Design Sevices

iWave provides end-to-end ODM services, from concept to production, leveraging our in-house expertise in hardware design, software development, FPGA design, and mechanical enclosure design. The FPGA expertise at iWave includes RTL, high speed bus interface and transceivers, storage, video, networking, and high-speed ADC/DAC with the entire product lifecycle, from initial concept to mass production and ongoing support.

RELATED VIDEOS

Play Video about FPGA YouTube Thumbelina
Play Video about Versal AI Edge Video
Play Video about RFSoC video

Copyright © 2022 iWave Systems Technologies Pvt. Ltd.