Zynq UltraScale+ MPSoC (ZU7/ZU5/ZU4) 3U-VPX Plug-in Module

Zynq UltraScale+ MPSoC (ZU7/ZU5/ZU4) 3U-VPX Plug-in Module

iW-RainboW-G30V®

  • AMD Xilinx’s ZU7/5/4 – CG/EG/EV Zynq Ultrascale+ MPSoC
  • 64bit, 4GB PS DDR4 RAM with ECC (Upgradable)
  • 16 bit, 1GB PL DDR4 RAM (Upgradable)
  • 8GB eMMC Flash (Upgradable)
  • 3U VPX Connector (P0+P1A & P1B+P2A) based on ANSI/VITA46.30
Categories: ,

On-Board Features

ZU7/ZU5/ZU4 - Zynq Ultrascale+ MPSoC

Processing Unit (PS)

  • Quad/Dual Arm Cortex-A53 @1.5GHz, Dual Cortex-R5 @600MHz
  • Arm Mali-400MP2 GPU @677MHz

Programming Logic (PL/FPGA)

  • Up to 504K Logic cells & 230K LUTs
RAM Memory

PS: 64bit, 4GB DDR4 RAM with ECC (Expandable up to 8GB)

PL/FPGA: 64bit, 1GB DDR4 RAM (expandable up to 2GB)

On Board Flash

8GB eMMC Flash for Boot & storage (expandable up to 128GB)

3U VPX Backplane Features

3U VPX Connector - P0+P1A
  • Data Plane Port
    • DP01[3:0] – 1G/2.5G/10G Ethernet or PCIe Gen3 (using PL GTH Transceivers @ Upto 16Gbps/lane)
    • DP02[3:0] – 1G/2.5G/10G Ethernet or PCIe Gen3 (using PL GTH Transceivers @ Upto 16Gbps/lane)
  • Utility Plane
    • System Control Signals (SYSRESET, NVMRO, SYS_CON, SM Bus, Geographic Address Field, JTAG)
    • System Reference Clocks (REF_CLK, AUX_CLK)
    • Bussed GPIO (GDiscrete1)
    • Power Input (12V VDC, 3.3V_AUX, VBAT)
3U VPX Connector - P1B+P2A)
  • Utility Port
    • System Control Signals (Maskable Reset)
  • Maintenance Port
    • MP01 and MP02

3U VPX Front Panel Features

  • USB3.0 & USB 2.0 through USB Type-C Connector x 1
  • 3 Pin Debug UART Header x 1
  • 4K Display Port through USB Type-C Connector x 1
  • 10/100/1000Mbps Ethernet through 9 Pin Header x 1

Other On-Board Features

  • PCIe Gen2 x 1 through M.2(Key-M) Connector x 1
  • Temperature Sensor
  • Elapse Time Counter
  • Quad User LEDs
  • Reset Switch
  • Clock Synthesizer and Clock Buffers for GTH and GTR Transceiver Reference clocks

General Specification

Module Profile

MOD3-PER-2F-16.3.1-n

Slot Profile

SLT3-PER-2F-14.3.1

Slot Pitch

1 Inch Conduction Cooled

Power Supply

+12VDC +/- 5% input from VPX Connector

Form Factor

3U VPX (160mm X 100mm)

Need help with your FPGA and Product Design?

THERMAL SOLUTIONS

For any highly integrated FPGA VPX Plug-in Module, thermal design is a very important factor. iWave supports a VITA 65.0 compliant 3U Conduction Cooled Heatspreader.

RELATED VIDEOS

Copyright © 2022 iWave Systems Technologies Pvt. Ltd.