V2X On-Board Unit

V2X On-Board Unit

iW-RainboW-G41V®

  • NXP i.MX 8XLite CPU
  • 2 x Cortex-A35 & 1 x Cortex-M4 Core
  • 5 CAN-FD Ports
  • Wireless Connectivity: 5G/CV2X/ Wi-Fi / BT
  • Wired Interfaces: RS232 / RS485 / Ethernet /Analog Inputs/Digital I/O
  • IP67 Enclosure for Rugged Installations
  • LINUX 5.15.5 BSP and API for peripherals
  • Wide range of protocol support
  • ISO 15765-4 / J1939 / UDSonCAN / UDSonIP

SPECIFICATION

Processor Core

  • Processor: NXP i.MX 8XLite Processor
  • 2 x Cortex-A35 @1.2GHz & 1 x Cortex-M4F cores @264MHz
  • RAM: 2GB LPDDR4 (Upgradable upto 4GB)
  • FLASH: 8GB eMMC Flash (Upgradable upto 64GB)

V2X Radio and Wireless Transceiver

  • C-V2X PC5 with 1.28 GHz
  • DSRC 802.11p operates in the 5.9 GHz band
  • Ultra-Wideband (UWB) wireless transceiver

Wireless Communication

  • Cellular: 5G with 4G fall back option
  • CV2X: C-V2X – PC5
  • Wi-Fi: IEEE 802.11a/b/g/n/ac, WiFi 6¹
  • Bluetooth v5.2 BR/EDR/LE

Interfaces

  • CAN: 5xPorts (CAN FD)
  • 10/100 Mbps base T, 100 Mbps baseT1¹
  • Digital Inputs x 2, Digital Outputs x 2
  • Analog Input x 2 Port

Interfaces

  • RS232
  • RS485[Half duplex]
  • K-Line¹/LIN Interface¹
  • GPIOs x 4 (2DI, 2DO), Ignition Input x 1 Port

Antenna

  • 7 SMA Connectors: 1 x V2X front, 1 X V2X rear, 1 x 5G main, 1 x 5G diversity, 2 x MIMO, 1 x GNSS.
  • 2 RP-SMA Connectors:1 x Wi-Fi, 1 x BT

Sensors

  • Accelerometer, Gyroscope, Magnetometer¹

Connectors

  • Enclosure Connector: 35Pin Micro-fit

GNSS

  • High precision GNSS with RTK¹
  • GPS/GLONASS/BeiDou /Galileo

Software

  • Operating System: Linux 5.15.52
  • Protocols¹: Socket CAN, ISO 15765-4, CANopen, J1939, UDSonCAN,UDSonIP

Security

  • Hardware Security Module (HSM)
  • Trusted Platform Module (TPM)

Temperature Support

  • Operating Temperature: -40°C to +85°C²
  • Storage Temperature: -40°C to +85°C²

Power Input

  • Power: 9V – 32V up to 65V¹, POE¹
  • Internal Battery: 3.7V 1500mAh Lithium-ion Polymer

Power Modes

  • Stand-by Mode: < 20mA
  • Deep Power Down Mode: < 2mA

Enclosure

  • Protecting Class: IP67 with tamper detection
  • Dimension: 203 x 160 x 46 mm

BUILD INTELLIGENCE ON YOUR CONNECTED MOBILITY WITH V2X CONNECTIVITY HUB

 V2V (Vehicle-to-vehicle)

 V2I (Vehicle-to-infrastructure)

V2P (Vehicle-to-pedestrian)

Vehicle-to-vehicle communication (V2V) technology allows vehicles to transmit data wirelessly between two vehicles and smart infrastructure. V2X Hub integrated with C-V2X and DSRC communication provides vehicles with 360-degree awareness of the surrounding environment. V2V technology enhances the safety of autonomous vehicles when approached by unmanned or unseen intersection Data from V2V can further be used by intelligent transport system (ITS) to improve traffic management.
V2I technology captures the vehicle generated traffic data such as informing the driver about the safety, movement of vehicles, or other environmental conditions through V2X Connectivity Hub with IP67 enclosure support. It also enables Intelligent Transportation Systems to improve traffic management ranging various applications such as emergency vehicle approaching, hazardous location, pedestrians crossing, wrong way driving, roadwork, stationary vehicle, slow vehicle and environment condition.
Vehicle-to-Pedestrian involves direct communications between vehicles and pedestrians or other vulnerable road users like cyclists within close proximity. V2X Connectivity Hub integrated with C-V2X and DSRC communication is done directly or through the use of network infrastructure. It will facilitate warnings to be provided to the pedestrian of an approaching vehicle, and establishing a broadcast system that alerts drivers on the pedestrians whereabouts and vulnerable road users.

RELATED VIDEOS

Getting started with TCU: Part 1

Getting started with TCU: Part 2

Why harness cable approach for TCU?

Copyright © 2022 iWave Systems Technologies Pvt. Ltd.