Achronix Speedster7T SOM

Achronix Speedster7T SOM

iW-RainboW-G64M®

  • Achronix Speedster7t 1500t FPGA with F53 package
  • 8GB DDR4 with ECC (64bit + 8bit)
  • 14GB GDDR6 (7x 2GB Devices)
  • 32x SEDRES (with line rates of 53.125Gbps Raw SERDES & 106.25Gbps Ethernet)
  • Gigabit Ethernet from OSM
  • Dual Core iMX 8XLite OSM Module with 2GB LPDDR4 and 8GB eMMC Flash
  • Two 400pin High-Speed board to board Connectors

Achronix FPGA
  • Achronix Speedster7t 1500t FPGA with F53 package
  • 692K 6-input LUTs
  • 2560 LRAMs and 2560 BRAMs
  • 2560 MLPs
CPU
  • iWave OSM – SE LGA Module with i.MX 8XLite  Processor
Memory Interfaces
  • 8GB DDR4 with ECC
  • 14GB GDDR6 RAM
  • 2Gb SPI Flash
On SOM Features
  • iWave i.MX 8XLite  OSM Module
  • Gigabit Ethernet PHY
  • Clock Synthesizer for On-SOM Clocks
  • PTP & SyncE Network Synchronizer
  • Temperature Sensor & Voltage Monitoring
  • TPM2.0 Module
  • Fan Header
FPGA to OSM Interfaces
  • RGMII
  • QSPI
  • UART

Board to Board Connector1 Interfaces

From FPGA
  • 4x SERDES Channels(with line rates of 53.125Gbps Raw SERDES & 106.25Gbps Ethernet)
  • FPGA IOs: 16 Differential pairs/32 Single-ended Ios
From OSM
  • GPIOs x7

Board to Board Connector2 Interfaces

From FPGA
  • 28x SERDES Channels (with line rates of 53.125Gbps Raw SERDES & 106.25Gbps Ethernet)
From OSM
  • Gigabit Ethernet x 1 Port
  • USB 2.0 device x 1
  • Debug UART
  • I2C
Power Supply
  • 12V through Board-to-board connector2
Operating Temperature
  • -40°C to +85°C
Form Factor
  • 120mm x 90mm

DEVELOPMENT KIT

  • 1 QSFP Connector for 400G Ethernet
  • FMC+ High Pin count (HPC) connector x 3 (Serdes lanes and GPIOs are distributed across 3-FMC connector)
  • PCIe Gen4 x16 Connector x 1
  • Gigabit Ethernet through RJ45MagJack x 1
  • USB2.0 Device through Type C connector x 1
  • Debug UART through Type C connector x 1
  • Operating Temperature: -0°C to +85°C
  • Form Factor: 160mm x 210mm

Custom Design Sevices

iWave provides end-to-end ODM services, from concept to production, leveraging our in-house expertise in hardware design, software development, FPGA design, and mechanical enclosure design. The FPGA expertise at iWave includes RTL, high speed bus interface and transceivers, storage, video, networking, and high-speed ADC/DAC with the entire product lifecycle, from initial concept to mass production and ongoing support.

THERMAL SOLUTIONS

For any highly integrated System on Modules, thermal design is very important factor. iWave Supports Fan Sink solution for Achronix FPGA SOM.

RELATED VIDEOS

Play Video about FPGA YouTube Thumbelina
Play Video about Achronix YouTube banner
Play Video

Copyright © 2022 iWave Systems Technologies Pvt. Ltd.