Zynq Ultrascale+ MPSoC (ZU19/17/11EG) 3U VPX Plug-in Module

On-Board Features

ZU19/ZU17/ZU11 - Zynq Ultrascale+ MPSoC	Processing Unit (PS) Quad/Dual Arm Cortex-A53 @1.5GHz, Dual Cortex-R5 @600MHz Arm Mali-400MP2 GPU @677MHz Programming Logic (PL/FPGA) Up to 1143K Logic cells & 522K LUTs
RAM Memory	PS: 64bit, 8GB DDR4 RAM with ECC PL/FPGA : Dual 64bit, 8GB DDR4 RAM (Expandable up to 16GB)
On Board Flash	8GB eMMC Flash for Boot & Storage (Expandable up to 128GB)

ZU19/ZU17/ZU11 - Zynq Ultrascale+ MPSoC

Processing Unit (PS)

Quad/Dual Arm Cortex-A53 @1.5GHz, Dual Cortex-R5 @600MHz
Arm Mali-400MP2 GPU @677MHz

Programming Logic (PL/FPGA)

Up to 1143K Logic cells & 522K LUTs

RAM Memory

PS: 64bit, 8GB DDR4 RAM with ECC

PL/FPGA : Dual 64bit, 8GB DDR4 RAM (Expandable up to 16GB)

On Board Flash

8GB eMMC Flash for Boot & Storage (Expandable up to 128GB)

3U VPX Backplane Features

3U VPX Connector (P0+P1A)	Data Plane Port DS01[3:0] – 1G/2.5G/10G Ethernet or PCIe Gen3 (Using GTH Transceivers @Up to 16Gbps/Lane) Data Switch Port DP01[3:0] – 1G/2.5G/10G Ethernet or PCIe Gen3 (Using GTH Transceivers @ Up to 16Gbps/Lane) Utility Plane System Control Signals (SYSRESET, NVMRO, SYS_CON, SM Bus, Geographic Address Field, JTAG) System Reference Clocks (REF_CLK, AUX_CLK) Bussed GPIO (GDiscrete1) Power Input (12V VDC, 3.3V_AUX, VBAT)
3U VPX Connector (P1B+P2A)	Data Plane Port DP02[3:0] – 1G/2.5G/10G Ethernet (using GTH Transceivers @ Upto 16Gbps/lane) DP03[3:0] – 1G/2.5G/10G Ethernet (using GTH Transceivers @ Upto 16Gbps/lane) Control Plane Port CPutp[6:1] – 1G/2.5G/10G/25G Ethernet (using GTY Transceivers @ Upto 25Gbps/lane) CSutp01 – 1G/2.5G/10G/25G Ethernet (using GTY Transceivers @ Upto 25Gbps/lane) Utility Port System Control Signals (Maskable Reset) Maintenance Port MP01 and MP02
MT Ferrule Optical Connector (P2B)	8 Fiber Optical Transceiver using two Firefly Connector (using GTY Transceivers @ Upto 28.125Gbps)

3U VPX Connector (P0+P1A)

Data Plane Port
- DS01[3:0] – 1G/2.5G/10G Ethernet or PCIe Gen3 (Using GTH Transceivers @Up to 16Gbps/Lane)
Data Switch Port
- DP01[3:0] – 1G/2.5G/10G Ethernet or PCIe Gen3 (Using GTH Transceivers @ Up to 16Gbps/Lane)
Utility Plane
- System Control Signals (SYSRESET, NVMRO, SYS_CON, SM Bus, Geographic Address Field, JTAG)
- System Reference Clocks (REF_CLK, AUX_CLK)
- Bussed GPIO (GDiscrete1)
- Power Input (12V VDC, 3.3V_AUX, VBAT)

3U VPX Connector (P1B+P2A)

Data Plane Port
- DP02[3:0] – 1G/2.5G/10G Ethernet (using GTH Transceivers @ Upto 16Gbps/lane)
- DP03[3:0] – 1G/2.5G/10G Ethernet (using GTH Transceivers @ Upto 16Gbps/lane)
Control Plane Port
- CPutp[6:1] – 1G/2.5G/10G/25G Ethernet (using GTY Transceivers @ Upto 25Gbps/lane)
- CSutp01 – 1G/2.5G/10G/25G Ethernet (using GTY Transceivers @ Upto 25Gbps/lane)
Utility Port
- System Control Signals (Maskable Reset)
Maintenance Port
- MP01 and MP02

MT Ferrule Optical Connector (P2B)

8 Fiber Optical Transceiver using two Firefly Connector (using GTY Transceivers @ Upto 28.125Gbps)

3U VPX Front Panel Features

USB3.0 & USB 2.0 through USB Type-C Connector x 1
3-Pin Debug UART Header x 1
4K Display Port through USB Type-C Connector x 1
10/100/1000Mbps Ethernet through 9 Pin Header x 1

Other On-Board Features

PCIe Gen2 x 1 through M.2(Key-M) Connector x 1
Temperature Sensor
Elapse Time Counter
Quad User LEDs
Reset Switch
Clock Synthesizer and Clock Buffers for GTY, GTH, and GTR Transceiver Reference clocks

General Specification

Module Profile	MOD3-SWH-4F1U7U1J-16.8.7-n
Slot Profile	SLT3-SWH-4F1U7U1J-14.8.7-n
Slot Pitch	1 Inch Conduction Cooled
Power Supply	+12VDC +/- 5% input from VPX Connector
Form Factor	3U VPX (160mm X 100mm)

Custom Design Sevices

iWave provides end-to-end ODM services, from concept to production, leveraging our in-house expertise in hardware design, software development, FPGA design, and mechanical enclosure design. The FPGA expertise at iWave includes RTL, high speed bus interface and transceivers, storage, video, networking, and high-speed ADC/DAC with the entire product lifecycle, from initial concept to mass production and ongoing support.

Product Design Process

Certification & Qualification

Product Lifecycle Management

Mechanical Services

THERMAL SOLUTIONS

For any highly integrated FPGA VPX Plug-in Module, thermal design is a very important factor. iWave supports a VITA 65.0 compliant 3U Conduction Cooled heat spreader.

AMD

INTEL

ACHRONIX

NXP

TI

ST

RENESAS

PCIe CARDS

VPX CARDS

FMC CARDS

PCIe Cards

VPX Cards

FMC Cards

Documents

Design Support

Software

Documents

Design Support

Software

Zynq Ultrascale+ MPSoC (ZU19/17/11EG) 3U VPX Plug-in Module

Zynq Ultrascale+ MPSoC (ZU19/17/11EG) 3U VPX Plug-in Module

On-Board Features

3U VPX Backplane Features

3U VPX Front Panel Features

Other On-Board Features

General Specification

Custom Design Sevices

THERMAL SOLUTIONS

Related products

ADC & DAC PCIe Card Powered by RFSoC

Kintex UltraScale+ FPGA SOM

SmartNIC Storage Accelerator Card Zynq Ultrascale+

Virtex UltraScale+ FPGA SOM

Zynq UltraScale+ RFSoC SOM

RELATED VIDEOS

Related products

ADC & DAC PCIe Card Powered by RFSoC

SmartNIC Storage Accelerator Card Zynq Ultrascale+

Zynq UltraScale+ RFSoC SOM

Virtex UltraScale+ FPGA SOM

Kintex UltraScale+ FPGA SOM

Related News

FPGA System Design: Why Choose FPGA SoM for Optimal FPGA System Design

Start of Harmonized FPGA Module (HFM) Working Group for FPGA System on Modules

iWave Launched RFSoC ADC DAC PCIe Card for Multi-Channel RF Applications

Upgrade to ARINC 818-3 with iWave: For High-bandwidth Real-time Video Transport

Subscribe to iWave Newsletter